An exclusive bundle by Audio-Technica and Audient. The wide dynamic range of the AT2035 harmonises with the iD4 Black's class-A console mic pre, all heard through the ATH-M40x's extended frequency response. Designed for critical home/project/professional studio applications and live performance, this side-address cardioid studio condenser delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications, the AT2035 provides an exceptional level of consistency from model to model. It comes equipped with a protective pouch and a custom shock mount.
Type Dinámicos cerrados
Driver Diameter 40mm
Magnet Neodymium
Voice Coil CCAW (Copper-clad aluminum wire)
Maximum Input Power 1,600 mW @ 1KHz
Sensitivity 98 dB/mW
Impedance 35 ohms
Folding/collapsible Yes
Weight 240g (without cable)
Cable - Detachable Yes
Connector Gold-plated stereo 1/8” (3.5 mm) connector with 6.3 mm (1/4”) screw-on adapter
Accessories Included 6.3 mm (1/4”) screw-on adapter, Pouch
Microphone
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 20 - 20,000 Hz
Open Circuit Sensitivity -33 dB (22.4 mV) re 1V at 1 Pa
Impedance 120 ohms
Maximum Input Sound Level 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
Low Frequency Roll Off 80 Hz, 12 dB/octave
Dynamic Range 136 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 82 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 3.8 mA typical
Weight 403g
Dimensions 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
Output Connector Integral 3-pin XLRM-type
Accessories Included AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch